How to Use the Fabrication Tools Inside of Revit

Thursday, July 21
9:00-12:00

The Workshop

Location:
299 Courtneypark Drive East
Mississauga
ON  L5T 2T6

We'll cover:

  • Specifying a Fabrication Configuration
  • Adding Part to a Revit Model
  • Refining and Completing the Fabrication Model

Learn how to use Revit to create a model that reflects the MEP fabrication intent, and share it with construction detailers. After this workshop, you will be able to create an MEP fabrication intent model in Revit, or convert a design-intent MEP model to a fabrication MEP model in Revit.

Bill Wright

MEP/BIM Technical Specialist

Bill is our MEP wizard! He has extensive experience in implementing, training, and presenting Autodesk Building and Energy modeling solutions for Architectural, Engineering, Interior Design and Construction Companies all over North America. He's a family man, avid softballer and tries his hand at the odd golf game.

Bill Wright - Partner, MEP

Registration Closes in:

24
days
15
hours
36
minutes
06
seconds

Seats are limited to keep the workshop interactive and effective.

whenever I have a Revit question or need troubleshooting advice, I know I can call

Bill Wright has been MCW Consultants’ Go-To-Person for a number of years and has always shown a strong knowledge of the Revit program. Whenever I have a Revit question or need troubleshooting advice, I know I can call Bill and he will have a solution for me.

profile-pic
Laura-Lee Moran
Associate, National Manager of BIM Services at MCW Consultants Ltd.

extensive understanding of Revit and BIM processes

The feedback that I am receiving from all of my trainees and their managers is extremely positive. Bill Wright is very professional with his extensive understanding of Revit and BIM processes are evident with his teachings. We look forward to our ongoing engagements with Redcage and the success it brings. Thanks again guys!

profile-pic
Wayne Whiteduck
Senior CADD/REVIT Designer

their teaching methods allowed for a smooth transition to the software

Paul, Cameron and Bill came to our office to assist us in receiving grants for our Revit Fabrication training requirements. Their Revit knowledge base is extensive and their teaching methods allowed for a smooth transition to the software.

profile-pic
Paolo Lijoi
CAD/BIM Detailer